Szkło / Ceramika
Baza Aplikacji
Raporty o aplikacjach (8)
Representative results require adequate sample preparation
The following situation is typical for many production plants: After a routine quality check, the production process is stopped or an already produced batch is suspended, because the analysis results were not within the relevant critical values. But does the tested product really deviate from the specifications? The quality control managers are convinced of this because modern analysis instruments provide results with very low tolerances. The sample in question was tested several times and the result was confirmed. The question is why the product does not match the specifications although the production parameters have not been changed in any way.
The possibility that the tested product is indeed deficient cannot be excluded. However, it is often not the product itself which causes irregular analysis results but a lack of understanding of the steps which come before the analysis.
Air Jet Sieving of Bulk Materials
Particle size analysis and particle size distribution are important criteria for the quality control of bulk materials. In a running production process, the results of a quality check must be available quickly to allow for immediate adjustment of the production parameters. Depending on the expected particle size and sample volume, different sieving methods and sieving machines are suitable for analysis. The method used for particle size analysis is primarily determined by the fineness of the material to be sieved. For dry sieving of samples with particle sizes below 40 microns, air jet sieving is the method of choice.
Fast and Reproducible Sample Preparation with a Vibratory Disc Mill
The Vibratory Disc Mill RS 200 from Retsch is used for the quick, loss-free grinding of hard, brittle and fibrous materials to analytical fineness.
Size reduction within the context of sample preparation
In general “size reduction” is taken to mean the disintegration of solid substances by mechanical forces without altering their state.
Increasing the development efficiency of ceramic materials
The development of high-performance ceramics is determined by a large number of influencing factors. In addition to material-specific aspects, such as the chemical purity of the initial raw materials, particle size reproducibility and uniformity of particle morphology, production-specific factors also determine the final properties of ceramics.
Die neue Power Generation
Planeten-Kugelmühlen haben seit jeher einen festen Platz in der täglichen Laborpraxis zur Feinzerkleinerung unterschiedlichster Materialien. Neben dem Mischen und Zerkleinern hat sich in den letzten Jahren auch im mechanischen Legieren z.B. thermoelektrischer oder hochkoerzitiver Materialien ein weiteres Anwendungsgebiet ergeben.
Herstellung von Nanopartikel mit der Planeten-Kugelmühle
Die Herstellung von Nanopartikeln, deren Größe im Bereich von 1 Mikron und kleiner liegt, ist in vielen technischen Bereichen immer mehr auf dem Vormarsch, denn sie ermöglichen die gezielte Veränderung von Materialeigenschaften.
Produkty
Mielenie
Przesiewanie
Urządzenia pomocnicze
